Phone:
+86-27-85736489
+86-27-85736485
 |
It is secondary amine functional group-terminated linear polydimethylsiloxane .because of its reactive terminal group, it is used as modifier in organic resin production .
It has a special smoothness, softness, hydrophobicity, good chemical stability, excellent electrical insulation and resistance to high temperature. High flash point, low freezing point, long-term using between -50 ℃ ~ +200 ℃, low viscosity-temperature coefficient, high compression ratio, low surface tension, water-repellent moisture resistance, low heat conduction coefficient.
km-383
KMW
| Quantity: | |
|---|---|
Product name:Ammonia alkyl silicone oil
DESCRIPTION
It is secondary amine functional group-terminated linear polydimethylsiloxane .because of its reactive terminal group, it is used as modifier in organic resin production .
SPECIFICATION
| Item | Index |
| Appearance: | colorless light yellow liquid |
| Active Purity(%): | 100 |
| Viscosity ( 25ºC,MPas): | 100~1000 |
| Density(25ºC,g/cm3) | ~0.93 |
| Flash point(ºC): | 215 |
It can draw into polyamide, polyimide, polyurethane or other suitable polymer perpetual, when it reaction with the terminal containing secondary amine.
Improve the limpness ,even in the hypothermia.
Increase non-adhesive, smoothness and anti-friction.
Improve weather resistance and drop the adsorption.
Usage and dosage
Depends on the required performance, the amount of polymer is generally 3~30%, it's better to be diluted before adding into system.
Storage and packing
Stored in a cool ventilated place, stationary phase not less than 6 months.
Packed with 50kg plastic drum or 200kg coating metal drum.
Product name:Ammonia alkyl silicone oil
DESCRIPTION
It is secondary amine functional group-terminated linear polydimethylsiloxane .because of its reactive terminal group, it is used as modifier in organic resin production .
SPECIFICATION
| Item | Index |
| Appearance: | colorless light yellow liquid |
| Active Purity(%): | 100 |
| Viscosity ( 25ºC,MPas): | 100~1000 |
| Density(25ºC,g/cm3) | ~0.93 |
| Flash point(ºC): | 215 |
It can draw into polyamide, polyimide, polyurethane or other suitable polymer perpetual, when it reaction with the terminal containing secondary amine.
Improve the limpness ,even in the hypothermia.
Increase non-adhesive, smoothness and anti-friction.
Improve weather resistance and drop the adsorption.
Usage and dosage
Depends on the required performance, the amount of polymer is generally 3~30%, it's better to be diluted before adding into system.
Storage and packing
Stored in a cool ventilated place, stationary phase not less than 6 months.
Packed with 50kg plastic drum or 200kg coating metal drum.
